ISO 20122:2024

International Standard   Current Edition · Approved on 09 April 2024

Vegetable oils — Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with online-coupled high performance liquid chromatography-gas chromatography-flame ionization detection (HPLC-GC-FID) analysis — Method for low limit of quantification

ISO 20122:2024 Files

English 42 Pages
Current Edition
77.22 OMR

ISO 20122:2024 Scope

This document specifies a procedure for the determination of saturated and aromatic hydrocarbons (from C10 to C50) in vegetable fats and oils using the online-coupled high performance liquid chromatography-gas chromatography-flame ionization detection (HPLC-GC-FID). This document does not apply to other matrices.

The method is applicable for the analysis of mineral oil saturated hydrocarbons (MOSH) and/or mineral oil aromatic hydrocarbons (MOAH).

According to the results of the interlaboratory studies, the method has been proven suitable for MOSH mass concentrations above 3 mg/kg and MOAH mass concentrations above 2 mg/kg.

In case of suspected interferences, the fossil origin of the MOSH and MOAH fraction can be verified by examination by GC⨯GC-MS.

An alternative method for the epoxidation of the MOAH fraction (performic acid epoxidation) is proposed in Annex C. This alternative method provides comparable results to the ethanolic epoxidation of the MOAH fraction described in 8.6. This alternative method for epoxidation has proven to be efficient for samples with a high amount of interferences in the MOAH fraction (e.g. tropical oils).

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015 
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 7718-2:2025
 
International Standard
Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors
ISO/IEC/IEEE 32430:2025
 
International Standard
Software engineering — Software non-functional size measurement
ISO 10218-1:2025
 
International Standard
Robotics — Safety requirements — Part 1: Industrial robots
ISO 10218-2:2025
 
International Standard
Robotics — Safety requirements — Part 2: Industrial robot applications and robot cells